QUILTING SERVICES

Edge to Edge (E2E)

I offer edge-to-edge (E2E) quilting with a variety of designs. E2E quilting means you will have the same design over the entire quilt. I will work with you to choose a design that best compliments your quilt top. E2E designs start at $0.0225/sq. in. Premium designs are more detailed and are $0.03/sq. in. If you don’t see what you’re looking for let me know. I can work with you to find the perfect design for your quilt. Scroll down to fill out the E2E quilting request form.

 

Custom Quilting

Custom quilting is more time consuming and complex. Anything other than E2E is considered custom. Pricing is determined on an individual basis and can only be determined after we have met to look at your quilt and determine how you want it quilted. I am limited in the number of custom quilts I can take at this time. If you’d like to discuss your custom quilting needs scroll down to fill out the custom quilting request form.

Thread Selection

I will use a blending thread color unless you request something different. The quilting fee included the use of one thread color. Additional colors are charged at $5/color. I use SoFine and Glide thread in my machine.

Quilting Process

Your quilt will be loaded to the frame and quilted with care. I will make every effort to make your quilt as square as possible knowing that most quilt tops are not provided perfectly square. When your quilt is finished I will take off the frame and trim any threads from the quilting process. I do not trim the backing or batting from the quilt when it is finished. 

Preparing your Quilt

There are several things you  must do prior to sending your quilt in for longarm quilting. Each of these steps help ensure your top is in the best position for beautiful quilting. If the following preparations are not followed it can affect the quality of your finished quilt and may increase your turnaround time for me to complete it.

Backing

Size: The backing of your quilt MUST be AT LEAST 4 inches wider that the top on ALL FOUR SIDES. (Example: if your quilt is 60” x 60” your backing would need to be 68” x 68”). When loading a quilt on the longarm frame we must have room to attach to leaders and test thread tension. If your backing is not the proper size I will reach out so we can discuss options. 

  • Seam: If your quilt top and/or backing are directional please sew the seams so they are parallel to the top whenever possible. This allows me to load the seam horizontal with the frame to decrease bulk. 

  • Piecing: Please piece with ½” seam allowance (not ¼” like piecing the top) and press open. The fewer pieces the better and it’s helpful if all seams are going the same direction. Vertical seams can sometimes leave a visual “line” on the top of the quilt because of the increased bulk.

  • Please be sure your backing is square. This will help ensure there are no puckers or creases in the back during the quilting process

  • Centering the quilt top to the backing: The quilting process is very different for longarming than it is for domestic machines. It is very difficult to center a quilt top to the back. If this is something you are wanting please make sure I am aware so we can discuss details but, know I cannot guarantee the finished product will be perfectly centered.

  • Marking the top edge: Please pin a piece of paper to the top of your quilt top and backing that says “Top.” This is especially important for directional fabrics. If you do not mark the top I will assume it is not directional and I can load to the frame in any direction

  • Pressing: Please be sure to press all seams.

  • Top: press seams in the best direction to decrease bulk. If you have sections where several seams come together, resulting in increased bulk, it can be difficult to quilt through. You may want to consider using a “quilter’s block” to flatten as much as possible.

  • Backing: please press the seams open.

  • Trimming threads: please be sure to trim all threads as this is not something I will be able to do during the quilting process. This is especially important if you have light fabric and some dark threads. 

  • Borders: Make sure all borders are measured and attached correctly. Often border are just sewn on and not measured. If they are not properly sized and attached it can result in wavy borders. Lay your quilt out flat and make sure the entire top lays flat and the borders don’t appear to be wavy. Quilters can typically take a “tuck” and use other techniques to take up the bulk and work it in but this isn’t always the case. While we can usually “hide” things pretty well there is always the chance this will be noticeable.

  • Batting: I require a high quality batting to ensure a beautiful result. You may purchase Quilter’s Dream batting through me at a 15% discount when purchased with quilting services. I typically have poly and 80/20 on hand but can purchase any type of batting they carry if you want something different. You may provide your own batting but, if it’s not a high quality I will contact you with options prior to loading your quilt.

  • Delivering:

  • Fold the top and back separately with the seams on the inside to decrease fraying of the seams. 

  • DO NOT sandwich the quilt together. A longarm quilter must load all 3 portions separately onto the frame

  • If shipping please seal in a plastic bag prior to putting it into a box. This will protect from possible water damage during the shipping process

Quilting Services Request

Please fill out the quilting services request form so we can collaborate together. After you complete the form I will respond back to you to review and discuss any additional details. I will send a final review and quote after we have agreed on all the details.